Comtrol AT Commands for SmartACFL Instrukcja Użytkownika Pobierz pdf (Strona 48)

Command Reference Manual

3-28

Conexant

100722A

3.2.3.8 M - Speaker Control

This command selects when the speaker will be on or off. The parameter value, if valid, is written to S22 bits 2 and 3.

Syntax

M<value>

Defined Values

<value> Decimal number corresponding to the selected option.

0 Speaker is always off.

1 Speaker is on during call establishment, but off when receiving carrier. (Default.)

2 Speaker is always on.

3 Speaker is off when receiving carrier and during dialing, but on during answering.

Result Codes

OK <value> = 0 to 3.

ERROR Otherwise.

3.2.3.9 &G - Select Guard Tone

This command causes the modem to generate the guard tone selected by this command (DPSK modulation modes only).

The parameter value, if valid, is written to S23 bits 6 and 7.

Syntax

&G<value>

Defined Values

<value> Decimal number corresponding to the selected option.

0 Disables guard tone. (Default.)

1 Disables guard tone.

2 Selects 1800 Hz guard tone.

This command may not be permitted in some countries.

Result Codes

OK <value> = 0 to 2.

ERROR Otherwise.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 171 172

Brak uwag

Comtrol AT Commands for SmartACFL Instrukcja Użytkownika Strona 48